HIGH-VOLTAGE STAND FOR BURNING OF DEFECTIVE INSULATION OF SVP CABLES
GENERAL TECHNICAL DATA OF SVP
Power supply - single-phase AC network with a frequency of 50 ± 2 Hz, voltage of 220 ± 20V
Consumption current, no more, A, 70
Kilovoltmeter measurement limits, kV, - 25
Equipment weight, kg, not more - 165
Service staff - 2 operators (at least)
Service life, years, - 10
BURNER UNIT BPR-25/8
Maximum output voltage in no-load mode, kV, 22
Minimum output voltage in no-load mode, kV, 1
The number of burn steps. five
Maximum current of the piercing unit in short circuit mode, A, not less than 11
Maximum voltage of afterburning in no-load mode, V, 500
Maximum afterburning current in short circuit mode, A, not less than 22
Power consumption of the burning unit, kVA, no more than 16.8
Power supplied to the load, kVA, not less than 11
Burning unit operation mode - long
Overall dimensions, mm, 495х350х560
Weight, without a mobile platform, kg, no more than 90
No. |
Name |
Qty. |
1 |
SVP stand control unit |
1 |
2 |
Burning unit BPR-25/8 |
1 |
3 |
Set of wires and cables for connection
|
1 |
4 |
Line choke |
1 |
five |
High-voltage stand for burning of defective insulation of SVP cables. Manual. |
1 |
6 |
High-voltage stand for burning of defective insulation of SVP cables. The passport. |
1 |
High-voltage stand for burning defective cable insulation SVP is designed for burning defective cable insulation with its subsequent afterburning.
Terms of Use:
- ambient temperature range, о С - from minus 20 to +40;
- relative air humidity at 25 C - up to 80%;
- atmospheric pressure, mm Hg Art. - 650 - 800