+380 (67) 577 67 75
Order a consultation
Mobile burning and search systems on mobile platforms
-
HIGH-VOLTAGE STAND FOR BURNING OF DEFECTIVE INSULATION OF SVP CABLES
High-voltage stand for burning defective cable insulation SVP is designed for burning defective cable insulation with its subsequent afterburning.
Terms of Use:
- ambient temperature range, о С - from minus 20 to +40;
- relative air humidity at 25 C - up to 80%;
- atmospheric pressure, mm Hg Art. - 650 - 800
-
HIGH-VOLTAGE ACOUSTIC STAND SVA
High-voltage acoustic stand SVA is designed for:
- determining the distance to the place of damage using a high-voltage reflectometer
"ISKRA-3" (not included in the standard delivery set);
- search for cable faults using the GAUV-6-05 acoustics generator and receiver
P-806 (not included in the standard delivery set) by acoustic method.
Terms of Use:
- ambient temperature range, о С - from minus 20 to +40;
- relative humidity at 25 to C - 80%;
- atmospheric pressure, mm. rt. Art. - 650 - 800
- determining the distance to the place of damage using a high-voltage reflectometer
-
HIGH-VOLTAGE STAND SVPA
High-voltage stand SVPA is designed for:
- burning of defective insulation of cables with its subsequent afterburning;
- determination of the route of cable lines (using the generator GZCH-2500);
- topographic determination of places of damage to cable lines by induction and acoustic methods;
- determination of the distance to the place of damage of cables with a voltage of
0.4-10 kV by a pulsed non-burn method at high and low voltage.
Terms of Use:
- ambient temperature range, о С - from minus 20 to +40;
- relative humidity at 25 to C - 80%;
- atmospheric pressure, mm Hg Art. - 650 - 800
The SVPA is powered from an industrial single-phase network 220V, 50 Hz. Power is allowed from an autonomous power supply generator with a capacity of at least 4.0 kVA. To fully realize the capabilities of the SVPA, the generator power must be at least 10 kVA.